ゲームボーイマクロ - ガラススクリーンレンズ
ガラスのゲームボーイマクロ画面。これにより、GBA ゲームをプレイするときに画面の未使用部分を覆う境界線が追加され、マクロの仕上げが追加されます。
これはマクロにのみ適合し、ストック スクリーンからデジタイザー タッチ スクリーンを取り外す必要があります。画面を所定の位置にそっと保つために、画面の後ろに薄いフォームを使用することもできます。 インストールのヒントについては、ここを参照してください。
このガラスはプラスチック製のフロントハウジングに合わせて作成できますが、このガラスに合わせて開口部をやすりで少し削ったりカットしたりする必要がある場合があります。プラスチック製フロントシェルの経験がないため、サポートは利用できません。
2020 年 7 月 27 日以降、このガラスではスペーサーは必要なくなりました。スペーサーは不要で、フロントアルミニウムシェルに組み込まれています。繰り返しになりますが、2020 年 7 月 27 日以降に製造されたシェルがある場合は、スペーサーを使用しないでください。
注: 過去に当社のガラスサプライヤーはガラスを小さくしていました。私たちは独自のガラスを作ることにしました。これは私たちの住宅によりよくフィットします。ギャップをゼロにすることは不可能です。そのため、美観を高めるために、ガラス スクリーンを取り付ける前に、黒いペイント ペンを使用して LCD のシルバーのスチール フレームに色を付けることをお勧めします。最初に必ず LCD 上の接着剤をすべて取り除いてください。
すべての DSL マクロ製品を表示するには
を参照してください。さらに一般的な質問がある場合は、 FAQ ページをご覧ください。
Notes
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Resources
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
International Customers
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
Give your Classic electronics a new life!
Unique
Parts cut from a solid block of billet aluminum
Protection
Each part is anodized for long lasting protection