ゲームボーイカラー アルミニウムフロントプレート - 前面のみ
ゲームボーイカラーの機械加工アルミニウムシェル - フロントのみ
この CNC 加工アルミニウム フロント シェルを使用すると、ゲームボーイ カラーをバックライト付きカラー スクリーンに変換できます。プラスチック製の背面ハウジングを使用する必要があります。これは、単三電池を使用したい人にとっては優れた代替品です。
これらのシェルは、いくつかのタイプの画面と互換性があります。
- Funnyplaying の IPS スクリーン - ストックサイズ、はんだ付けは必須ではありません
- Q5 スクリーンキット - はんだ付けが必要な大型スクリーン
- Funnyplaying の Retro Pixel 1.0 (非ラミネート バージョン)
透明またはカラーの陽極酸化処理により、表面を傷、酸化、指紋から保護します。
PCB とプラスチック製の背面をこの機械加工された前面に取り付けるには、付属の機械加工された留め具を使用する必要があります。留め具はM2ネジです。
部品の在庫がない場合は、中央の場所にアクセスして部品の入手可能性を確認してください。注文中の色と、部品が届くまでの推定時間も表示されます。残念ながら、パーツの量が多すぎるため、まだ全色を注文することはできません。通常3色ずつのご注文となりますので、色が出るまでお待ちいただく場合がございます。 https://www.boxypixel.com/pages/product-availability
GBC 製品をすべて表示するには
を参照してください。さらに質問がある場合は、 FAQ ページをご覧ください。
ノート：
- これらの部品は大量生産されておらず、複数の機械工場を使用しているため、表面仕上げ、質感、色がバッチごとに異なる場合があります。また、お使いの画面や照明、アルマイトの変化により色が異なって見える場合があります。
- これらの変動や部品の潜在的な損傷により、在庫は若干ずれる可能性があります。調整は行っておりますが、これを予測することは難しく、どのアイテムでも予想よりも少ない場合があります。
- 注文のキャンセルおよび返品に関する返金ポリシーを必ずご確認ください。
- 海外からの注文、輸入手数料、関税に関する情報については、よくある質問ページをご覧ください。出荷金額は変更しません。
- 真鍮パーツはご注文を頂いてから一つ一つカスタム加工しております。真鍮は機械加工されたままの状態で出荷されるため、多少の酸化/変色が見られる場合があります。最終的な表面仕上げを行う必要があるとします。加工には約1ヶ月ほどお時間をいただきます。
Notes
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Resources
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
International Customers
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
Give your Classic electronics a new life!
Unique
Parts cut from a solid block of billet aluminum
Protection
Each part is anodized for long lasting protection