Replacement Machine Screws
These replacement machine screws are ideal for your Boxy Pixel builds, serving as substitutes for lost or damaged fasteners. Note that fasteners are typically included with shells upon purchase; these replacements ensure you have backups as needed. Quantities vary depending on the type, typically ranging from 5-8 screws per bag, depending on the product.
Includes
- Replacement machine screws as described below:
- M2x6mm long - Game Boy Color and Advance, GBC/Pocket
- M2x4mm long - Game Boy Color and Advance, GBC/Pocket
- M1.4 (2mm, 3mm, or 5mm) - Nintendo Switch
- M1.7 (3mm, 4mm, or 6mm*) Flathead - Advance SP
- M1.7x3mm long Panhead - Macro
- M2x4mm long Flathead - Game Cartridges
Warnings
- *6mm may be too long so please use caution; 5mm is recommended but 6mm can work
- **Only TWO 5mm long fasteners should be in used in the joycons. Please refer to build instructions to prevent stripping threads.
Notes
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Resources
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
International Customers
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
These parts are not mass produced and we use multiple machine shops, so surface finish, texture, and color may vary between batches. Colors may also look different depending on your screen, the lighting, and variations in anodizing.
Please be sure to review our refund policy for cancelled and returned orders.
We cannot change the value of the shipment and sadly we do not have control over your particular country's fee/tariffs/taxes.
Brass parts come as machined and may show oxidation/discolor (due to being exposed to air) and some small machining or small scratches may be present. Assume you will need to do your final surface finishing using a flexible 3M sanding pad. (The 3M 7448 usually works well). After polishing, clean and apply clearcoat, poly, or other coating to maintain the shine. Note Brass is also very dense (heavy) and conductive. Consider in some applications, these attributes may have adverse effects. (ex. The SP hinges will not support the screen as well). If used with electronics, it is advisable to use kapton tape, insulating paint, (nail polish may work) to prevent electrical shorts.
Out of stock? Signup for our out of stock notification on this product page and check our product availability page
Assembly Instructions
We are located in the USA, and want everyone in the world to experience Boxy Pixel products worldwide! It is important to understand a few points:
1. There are two shipping methods available. DHL and USPS (United States Postal Service). DHL is very fast and comes with insurance, but can be expensive. The USPS slow shipping we offer can take many weeks, is not reliable, and is not insured.
2. If you do choose uninsured USPS for your international shipping, we do offer third party insurance to help in case it gets lost. This is "route" insurance. It is not expensive, and is worth the cost. Deselecting this option at checkout will waive all insurance. If your package is lost, we unfortunately cannot send a refund or replacement.
3. If an item gets shipped back to us due to delivery problems, we would need to charge additional fees if you would like to attempt delivery again.
4. Return shipping is the responsibility of the buyer
5. We are prohibited from shipping batteries outside of the USA.
Give your Classic electronics a new life!
Unique
Parts cut from a solid block of billet aluminum
Protection
Each part is anodized for long lasting protection